PEI-Genesis

Amphenol PT - PT-SE Connectors

Amphenol PT / PT-SE Connectors (MIL-DTL-26482 Series I)

EXTREME EXPOSURE MINI-CIRCULAR CONNECTORS

The Amphenol PT series and PT-SE series connectors (MIL-DTL-26482 Series I) provide high-density contact arrangements in a circular shell. Amphenol PT series connectors offer solder contacts, PT-SE offers high-performance crimp contacts, and PT-CE offers a commercial crimp option. These circular Amphenol PT series connectors provide quick-disconnect bayonet coupling for rapid mating and unmating, and several mounting styles and shell sizes.

• Rugged ShellAluminum alloy shell and hardware create a rugged connector with minimal weight. These connectors have been used extensively in commercial, military, and aerospace environments. Standard shells accept all MIL-DTL-26482 accessories.
• Environmentally-sealedComplete moisture sealing is achieved by combining four seals: shell, peripheral, interfacial, and wire. Wire seal is accomplished by multiple ripple design, exceeding the wire sealing requirements of MIL-DTL-26482.
• Resistant to Military EnvironmentsThese connectors will operate in temperatures from -67˚F to +257˚F (-55˚C to +125˚C) under the harshest possible conditions.
• Wide Range of Wire Gauges and Current-Carrying CapacityUp to 23 amps with wire gauges from 24 to 12 AWG wire.
• Resilient insulator & grommetA resilient neoprene insulator and integrated rear wire sealing grommet guarantees a liquid-tight assembly. Crimp contacts that can be inserted from the rear of the connector are available. Solder contacts are permanently bonded into the insulator.
• Solder or crimp gold-plated contactsPT connector contacts are gold-plated per MIL-G-45204 type II. PT-CE commercial crimp contacts are not military-approved, but the PT-SE crimp contacts are built in accordance to MIL-C-39029. Both types of contacts are crimped with the standard M22520/1 crimp tool. Socket contacts are closed to eliminate damage from test probes and to help prevent misaligned pins during engagement. Contact insertion is from the rear of the connector. When the contact is fully inserted, it snaps securely into retention tines embedded in the insulator. Contact extraction is accomplished from the front with the proper extraction tool. Pressing the tool plunger pushes the contact out through the rear of the connector.
• Agency ApprovalsMIL-DTL-26482 Series I, UL #E115497, VG95328 or HE301